Laminate flooring is an inexpensive yet durable option with a natural shine, which is why many homeowners choose to install this synthetic flooring product over their hardwood flooring. It is an excellent addition to any home, as it enriches the interior’s features and ambience with its natural-looking colours and shine.
Despite this durability, however, this flooring loses its lustre over time too. While your first instinct may be to wax or polish it, these substances can, in fact, damage the floor and make it dull in the long run. You must use the right materials and follow the proper cleaning methods to bring back its shine to keep it looking brand new.
If your laminate floors are due for cleaning and polishing, but you aren’t quite sure where to start, then we’re here to help you out! Here are the basic steps you can follow to help you clean your laminate flooring and make them shine again.
1. Start By Sweeping or Vacuuming the Floor
Before you proceed with using any cleaning agent, you must first remove the pet hair, dust, and dirt that may have accumulated on your laminate floors by sweeping or vacuuming it. If necessary, repeat this process until you are confident that the area has been adequately cleared off. Doing so will ensure that loose dirt and other debris will not get in the way once you start the wet cleaning process.
2. Clean the Floor with Water, Vinegar, and Oil
You can use readily available liquids at home to make your floors shine again—particularly, a solution composed of water, vinegar, and oil. Just mix these three in a squirt bottle, and you’re good to go.
If you cannot stand the smell of vinegar, however, then you may add several drops of essential oil into the mixture to mask its scent. Squeeze out an adequate amount of this to the floor and rub it in a circular motion with a microfibre cloth.
Remember to start from the far corner of a room and then work on each section until you have reached the entryway. Wring the cloth as it gets dirty and, if necessary, discard your cleaning solution if it has become excessively dirty. You may need to make a new mixture, especially if your laminate flooring has much grime. Once done, you should allow the floor to air out and dry thoroughly before walking on it again.
Other Important Things to Remember
If you want to preserve your laminate floors, vinegar is your best option. Commercial floor cleaners usually contain harsh chemicals and soaps that will leave streaks on your flooring and make them dull.
Moreover, you can add baking soda into your cleaning solution to break up dirt and grime more effectively. It is an alkaline solution that is completely safe to use on tile floors and linoleum.
For best results, you may also clean the wood baseboards while you wash your laminate floors so that you can truly achieve cleansing from the inside out!
While laminate floors are attractive because of their natural-looking polish, they also require regular maintenance to maintain their lustre. Following the tips shared above can help you clean this flooring without damaging their surface or reducing its gloss. It may be an exhausting chore, but at the end of the day, you’ll be delighted to see your laminate floors adorned in its splendid gloss once again.